ColorFabb Woodfill (0.75kg)

ColorFabb Woodfill (0.75kg)

  • $69.95


ColorFabb woodfill is a new type of wood filament for 3D printing.  It consists of 30% pinewood in a binder of colorFabb PLA/PHA. It is very different from wood filaments that are on the market now.

  • The filament and printed object have good mechanical properties.  The filament is reasonably ductile and will not snap during regular handling.  It feeds well in bowden and direct drive extruders.
  • The colour is stable over a range of temperatures. This material will not change colour by increasing or decreasing temperature.
  • The added filler gives the material a lot of melt strength, so bridging is excellent.  This same property also allows the material to be heat smoothed after printing.
  • The printed object immediately has full strength after printing just like a regular PLA print.  No post-print curing time is required.
  • The filler content results in nearly zero warpage or shrinkage of the part.  The makes dimensional stability and build plate adhesion excellent.
  • This material is provided on a spool!  Standard spool is a minimum of 750 grams of filament.
  • It is available in 1.75mm and 2.85 (3mm) and can be printed with a 0.4mm or larger nozzle.